Fe360, Fe490, Asform490 STEEL
BABEL D products are made from a steel alloy composed of iron and carbon which is 100% recyclable.
The steel components are protected by a sophisticated galvanic process and then coated with polyester powder in a wide range of carefully composed colours to guarantee their maximum resistance to weathering.

Stainless steel consists of iron, nickel, chromium and molybdenum. The latter two components provide high protection against rust and corrosion. Stainless steel provides stability, durability, hygiene compliance and heat resistance and is easy to clean. AISI 316, used by BABEL D, is highly resistant to chloride corrosion.

Aluminium alloys resist general corrosion and are fully recyclable and reusable in various industrial fields. A layer of polyester powder coating protects and preserves product qualities.

The protection of steel and aluminium alloys against weathering complies with the Qualicoat ISO 2810 standard for products used in architecture.

The protection of steel and aluminium alloys against weathering complies with the Qualicoat ISO 2810 standard for products used in architecture.

BABEL D products are treated to guarantee a long service life while preserving their functional and aesthetic qualities. BABEL D products will last longer if you take care of them by cleaning them with a soft cloth and water or neutral detergents every three to six months, depending on the environmental and climatic conditions. Do not use abrasive detergents and brushes Be careful using BABEL D products in marine environments with high humidity or near swimming pools, especially in closed environments if chlorine is used as a disinfectant.

Inox AISI 316

Anthracite 01

White 02

Honey 03

Periwinkle 04

Rhubarb 05

Sage 06

Terracotta 07

Turquoise 08


High Pressure Laminate (HPL) consists of layers of paper impregnated with thermosetting resins and compacted with decorative paper and a protective coating. It is a self-supporting durable material suitable for outdoor use as it is resistant to weathering. Available in three different colours and textures (chalk white, rust or concrete effect).

HPL tabletops can be washed with water and dried with a soft cloth. If necessary, use a sponge or a cleaner suitable for laminates and dry the surface with a cloth to avoid marks. Do not use powders or abrasive cleaners.

White H01

Rust H02

Concrete H03


An environmentally friendly material, made from 100% recycled and FSC® certified paper and cardboard with vegetal resin, mainly from pressed cashew nutshells. It is a solid and resistant innovative material.

As an environmentally friendly product, it may be subject to colour variations.

Using natural pigments instead of chemical dyes ensures greater UV resistance, stable colours and consistent colouring.

PaperStone® tabletops can be cleaned with a cloth dampened with warm water and mild soap. The surface has good resistance to stains. However, we recommend that you keep the PaperStone® tabletop dry to avoid limescale deposits. Do not use bleach-based liquid detergents. Avoid using harsh chemicals. Do not use abrasive sponges or metal scrapers.

Pewter P01

Sand P02


Iroko wood has many properties: in particular, it is resistant to mechanical stress and weathering such as changes in temperature, humidity and UV rays. It is easy to cut despite its hardness. Iroko is characterised by its golden yellow to yellow-brown colour, which tends to darken after seasoning to a warm shade. Iroko is considered a ‘fat wood‘ because it is resistant to water and humidity. It is perfect for furnishing gardens, terraces and porches and has an extremely long life and use.

For daily cleaning you can use a soft cloth dampened with water and a mild liquid soap. Over time, natural iroko will take on a grey colour due to exposure to sunlight and weathering. Iroko protects itself thanks to its natural oils, which make it waterproof.
Every 4 to 6 months you can clean the product with a neutral detergent, sand it gently with fine-grit sandpaper and then apply a coat of water-based impregnation and wax with a brush.

Iroko T01

Fabrics and rope


100% acrylic fabric refined and pleasant to the touch while having a certain firmness. It has a natural appearance and can be used indoors and outdoors.
Protected by a water-repellent finish with an anti-mould, stain-resistant, sun-resistant treatment and high colour fastness.





100% PAC Dralon fabric. It is incredibly soft to the touch and has a pleasant appearance. It can be used outdoors because it is water repellent.
It has high functional qualities. It is protected against UV rays and is durable and resistant to wear. It is stain-resistant, avoids absorption and makes daily cleaning easier.













Fabric is composed of 85% vinyl and 15% polyester. High-end decoration fabric offers the best performance.
It is treated to provide excellent outdoor- and water- resistance.

Use a neutral soap




A single braided rope with a constructed polyester core. Strong and water-resistant rope.

Clean the rope with a soft brush, water and a mild detergent. Then rinse with cold water.

The braided rope parts may flex slightly with prolonged use.